欢迎访问bob综合体育投注院!
所在位置: 网站首页 > 师资队伍 > 教工名录 > 正文
教工名录

【此处插入照片宽度190】

照片处暂空出)

曹玲飞

系所:中心实验室

职称:研究员

职务:

学位:博士

邮箱:[email protected]

电话:13996310689

学习工作经历

2014.06-          bob综合体育投注百人计划研究员,博士生导师

2008.11- 2014.06    澳大利亚Monash大学国家轻合金研究中心研究员

2006.11-2008.11    日本东京大学工学部特别研究员、日本学术振兴会(JSPS)博士后

2003.09-2006.11    中南大学材料学院授课教师

2003.09-2006.09    中南大学材料学院材料物理与化学专业攻读博士学位

1999.09-2002.03    中南大学材料学院材料物理与化学专业攻读硕士学位

1995.09-1999.07    中南工业大学材料学院材料物理与化学专业攻读学士学位

 

社会兼职

担任中南大学学报(英文版)青年编委(SCI)、编辑国际铝合金大会ICAA15会议论文集一本。此外,长期担任本领域国内外著名期刊的审稿人,如Acta Materialia, Philosphical Magazine Letters, Materials CharacterizationJournal of Alloys and CompoundsJournal of Materials Research and Technology Intermetallics, 中国有色金属学报、金属学报等。

多次在THERMEC、中国材料大会等国际国内学术会议做邀请报告及会场主席,是先进材料基因组“111”引智基地、沈阳材料科学国家研究中心—轻金属研究部(bob综合体育投注)、“金属材料的形变、相变及强韧化”国家自然科学基金创新群体、教育部轻合金国际联合实验室的骨干成员,担任材料基因工程重庆市重点实验室副主任。

 

主讲课程

本科生课程:金属快速凝固与非晶材料

研究生课程;材料现代物理分析方法,材料现代测试分析技术

 

主要研究方向

材料显微组织与性能的关系,研究过的典型体系有:车辆用高性能铝合金、航空用先进铝合金及钛合金、高强高导铜合金、形状记忆合金及纳米磁性材料。近年来主要聚焦于铝合金析出行为及材料多维多尺度表征技术的研究,是bob综合体育投注三维原子探针实验室的主管和学术带头人。

 

科研项目

2019-2022主持7XXX系铝合金时效析出过程中的原子团簇影响规律及其作用机理,国家自然科学基金面上基金(项目编号:51871033),72万元; 

2019-2020主持JG2019054,国防科工局重点实验室基金,20万;

2018-2019主持,高强耐蚀铝合金多尺度析出相时效调控机理的研究,2018年留学人员回国创业创新支持计划创新类重点资助(项目编号:cx2018002),12万元;

2018-2019主持JG20190121,中国航发北京航空材料研究院,20万;

2017-2020主持,高强耐蚀铝合金析出相组态调控机制的研究,重庆市科技计划项目基础科学与前沿技术研究专项一般项目(项目编号:cstc2017jcyjAX0245),5万;

2016-2020bob综合体育投注负责人,高性能铝合金大规格挤压材制造与应用的基础研究,科技部国家重点研发计划(项目编号:2016YFB0300901),85万;

2016-2021子课题负责人,先进材料多维多尺度高通量表征技术,科技部国家重点研发计划(项目编号:2016YFB07004012016YFB0700403),70万;

2015-2016主持JG2016007,西南铝业(集团)有限责任公司,50万;

2015-2020骨干,金属材料的形变、相变及强韧化研究,国家自然科学基金专项基金创新集体基金(项目编号: 51421001),35万;

2012-2013主要执行人,航空用先进Ti合金的研发,澳大利亚基金委员会项目,45万澳币/年;

2008-2011年,第一执行人,汽车车身板用先进Al-Mg-Si(-Cu) 合金的开发,澳大利亚国家轻合金中心与中国铝业合作项目,107万澳币;

2006-2008年,主持,纳米粒子分散下新型磁性流体、ER流体和MR流体的制造及应用,东京大学及日本学术振兴会资助,1200万日币;

2003-2006年,主要执行人,非晶合金粉末固化成型──磁力控制退火晶化法制备大块状FeMB合金纳米晶的研究,国家科技部“十五”攻关项目子课题,30万;

 

论文/专著/专利

著作:

(1) 先进高强导电铜合金,中南大学出版社,2015本人参著铜合金框架带材、弥散强化铜合金和弹性导电铜合金章节,约32万字(pp. 139-202, 288-470)。

(2) 铜加工技术实用手册冶金工业出版社,2007。本人参编合金设计开发、紫铜、青铜和铸造铜合金章节,约18万字(pp.29-43, 73-119, 149-232)。

(3) 中国材料工程大典,化学工业出版社,2006。该书被列入国家重点图书”项目,本人参编铜合金部分,约20万字(第4, pp. 219-244, 274-305, 329-341

 

专利:

(1) 曹玲飞、吴晓东、王一唱、黄光杰、刘庆、饶茂,一种石油钻杆用铝合金及其管材的制造方法和石油钻杆用管材,申请号201911368717.0,发明;

(2) 曹玲飞、宋辉、吴晓东、张玲、黄晓旭,扫描电镜和原位力学测试及三维原子探针设备通用样品座,申请号201911370804.X,发明;

(3) 曹玲飞、宋辉、吴晓东、张玲、黄晓旭,一种扫描电镜及三维原子探针用跨设备表征通用样品底座,申请号201922383891.4,实用新型;

(4) 李朝阳、黄光杰、曹玲飞,一种电导率高的铝锂合金及其制备方法,申请号201810128407.0,发明;

(5) 李朝阳、黄光杰、曹玲飞,一种铝锂合金及其制备方法,申请号201810127386.0,发明(已授权);

(6) 张玲,曹玲飞,贺琼瑶,蒋小娟,冯宗强,黄天林,吴桂林,黄晓旭,一种兼容针状试样的透射电镜高倾转原位力学样品座,授权号:CN207148005U,实用新型;

(7) 曹玲飞G. Dodbiba,藤田丰久,小野泽光雄,朴贤绪,FeNbVB感温磁性粒子、磁性流体及其制备方法,授权号:JP2010050386-A; JP4979657-B2(日本),发明;

(8) 曹玲飞G. Dodbiba,藤田丰久,伊藤亮嗣,朴贤绪,金属Ga保持过冷态的方法及相关添加物,授权号:JP2010070846-A; JP5411532-B2(日本),发明;

(9) 李周,汪明朴,唐宁,曹玲飞,贾延琳,宽滞后铜基形状记忆合金管接头制备方法,授权号:CN100478125C,发明。

 

期刊论文:

(1) Yichang Wang, Lingfei Cao, Xiaodong Wu, Xin Tong, Malcolm J. Couper,  Qing Liu Effect of trace Er on the microstructure and properties of Al–Zn–Mg–Cu–Zr alloys during heat treatments, Materials Science and Engineering: A , 2020, 792: 139807(通讯)

(2) Shengdan Liu, Menghan Zhang, Qun Li, Qianqian Zhu, Hui Song, Xiaodong Wu, Lingfei Cao, Malcolm J. Couper Effect of quenching rate on strengthening behavior of an Al-Zn-Mg-Cu alloy during natural ageing , Materials Science and Engineering: A, 2020, 793, 139900(通讯)

(3) Yan Zou, Xiaodong Wu, Songbai Tang, Qianqian Zhu, Hui Song, Lingfei Cao, Co-precipitation of T and η phase in Al-Zn-Mg-Cu alloys, Materials characterization, 2020, 169: 110610(通讯)

(4) Yan Zou, Lingfei Cao, Xiaodong Wu, Yichang Wang, Xuan Sun, Hui Song, Malcolm J. Couper, Effect of ageing temperature on microstructure, mechanical property and corrosion behavior of aluminum alloy 7085, J. Alloys Compd., 2020823:153792 (通讯)

(5) Yichang Wang, Lingfei Cao, Xiaodong Wu, Xin Tong, Bin Liao, Guangjie Huang, Zhengan Wang, Effect of retrogression treatments on microstructure, hardness and corrosion behaviors of aluminum alloy 7085, J. Alloys Compd., 2020, 814: 152264 (通讯)

(6) Qianqian Zhu, Xiaodong Wu, Lingfei Cao, Ling Zhang, Yahui Liu, Shifeng Liu, Qing Liu, In-situ micro-compression of single-crystal aluminum alloy 6063, Mater. Sci. Eng. A, 2020, 775: 138974 (通讯)

(7) Chong Yang, Lingfei Cao, Yihan Gao, Pengming Cheng, Peng Zhang, Jie Kuang, Jinyu Zhang, Gang Liu, Jun Sun, Nanostructural Sc-based hierarchy to improve the creep resistance of Al-Cu alloys, Mater. Design, 2020,186:108309

(8) Y.H. Gao, L.F. Cao, J. Kuang, J.Y. Zhang, G. Liu, J. Sun, Assembling dual precipitates to improve high-temperature resistance of multi-microalloyed Al-Cu alloys, J. Alloys Compd., 2020, 822: 153629

(9) Y.H. Gao, L.F. Cao, J. Kuang, J.Y. Zhang, G. Liu, J. Sun, Dual effect of Cu on the Al3Sc nanoprecipitate coarsening, J. Mater. Sci. Technol., 2020, 37: 3845

(10) Qiang Lu, Kai Li, Haonan Chen, Mingjun Yang, Xinyue Lan, Tong Yang, Shuhong Liu, Min Song, Lingfei Cao, Yong Du, Simultaneously enhanced strength and ductility of 6xxx Al alloys via manipulating meso-scale and nano-scale structures guided with phase equilibrium, J. Mater. Sci. Technol., 2020, 41: 139–148

(11) R. Liu, X. Xia, M.Y.Xie, C.Chen, S.Wang, Z.H.Zhong, L.F.Cao, Y.C.Wu, Effect of interlayers on the tensile behaviors of tungsten multilayered composites, J. Alloys Compd., 2020, 827: 154286

(12) Bin Liao, Xiaodong Wu, Lingfei Cao, Guangjie Huang, Zhengan Wang, Qing Liu, The microstructural evolution of aluminum alloy 7055 manufactured by hot thermo-mechanical process, J. Alloys Compd., 2019, 796: 103-110. (通讯)

(13) Qianqian Zhu, Lingfei Cao, Xiaodong Wu, Yan Zou, Malcolm J. CouperEffect of Ag on age-hardening response of Al-Zn-Mg-Cu alloys, Mater. Sci. Eng. A, 2019, 754: 265–268. (通讯)

(14) Bin Liao, Lingfei Cao, Xiaodong Wu, Yan Zou, Guangjie Huang, Paul A. Rometsch, Malcolm J. Couper and Qing Liu, Effect of Heat Treatment Condition on the Flow Behavior and Recrystallization Mechanisms of Aluminum Alloy 7055, Materials, 2019, 12311.   (通讯)

(15) Wenbin Tu, Jianguo Tang, Yong Zhang, Lingfei Cao, Lehang Ma, Qianqian Zhu, Lingying Ye, Shengdan Liu, Influence of Sn on the precipitation and hardening response of natural aged Al-0.4Mg-1.0Si alloy artificial aged at different temperatures, Mater. Sci. Eng. A, 2019, 765: 138250 (通讯)

(16) 王一唱,曹玲飞,吴晓东,邹衍,黄光杰,石油钻杆用7xxx系铝合金微观组织和性能的研究进展,材料导报, 2019, 33(4): 1190-1197(通讯)

(17) S. Wang, S.K. Feng, C. Chen, B. Liao, Z.H. Zhong, P. Li, L.F. Cao, Size effects on tensile properties and deformation mechanism of commercial pure tantalum foils, Int. J. Refract. Met. Hard Mater., 2019,80: 161–173 (通讯)

(18) Hongpeng Zhou, Menglei Feng, Kena Song, Bin Liao, Yichang Wang, Ruchuan Liu, Xiangnan Gong, Dingke Zhang, Lingfei Cao, Shijian Chen, A highly [001]-textured Sb2Se3 photocathode for efficient photoelectrochemical water reduction, Nanoscale, 2019, 11: 22871(通讯)

(19) Y. H. Gao, C. Yang, J. Y. Zhang, L. F. Cao, G. Liu, J. SunE. Ma, Stabilizing nanoprecipitates in Al-Cu alloys for creep resistance at 300oC, Mater. Res. Lett., 2019, 7: 18-25

(20) Y.H. Gao , L.F. Cao , C. Yang , J.Y. Zhang, G. Liu, J. SunCo-stabilization of θ’-Al2Cu and Al3Sc precipitates in Sc-microalloyed Al-Cu alloy with enhanced creep resistance, Mater. Today Nano, 2019, 6: 100035

(21) Y. Zou, Y. B. Xu, D. T. Han, Z. P. Hu, R. D. K. Misra, L. F. Cao , H. Song, Combined contribution of Cu-rich precipitates and retained austenite on mechanical properties of a novel low-carbon medium-Mn steel plate, J Mater. Sci., 2019, 54:3438–3454

(22) Boran Tao, Baifeng Luan, Risheng Qiu, Qiang Fang, Lingfei Cao, Yushun Liu, Xinyu Zhang, Riping Liu, Qing Liu, Analysis of atomic distribution near grain boundary in Zr-Sn-Nb-Fe-(Cu) alloys by atom probe tomography, J. Nucl. Mater., 2019, 515: 135-139

(23) Yahui Liu, Shifeng Liu, Haiyang Fang, Chao Deng, Lingfei Cao, Haitao Ni, Qing Liu, Orientation-dependent grain boundary characteristics in tantalum upon the change of strain path, Mater. Charact., 2019, 154: 277-284

(24) 张成行,曹宇,曹玲飞,黄光杰,朱禹龙,祝佳林,刘庆,异种铝合金搅拌摩擦焊接头的显微组织力学及腐蚀性能中国有色金属学报2019292255-2265

(25) Y.Z. Chen, K. Wang, G.B. Shan, A.V. Ceguerra, L.K. Huang, H. Dong, L.F. Cao, S.P. Ringer, F. Liu, Grain size stabilization of mechanically alloyed nanocrystalline Fe-Zr alloys by forming highly dispersed coherent Fe-Zr-O nanoclusters, Acta Mater., 2018, 158: 340-353(通讯)

(26) S Wang, Z H Wu, C Chen, S K Feng, R Liu, Liao B, Z H Zhong, P Lu, M P Wang, P Li, W Jan Coenen, Lingfei Cao, Y C Wu, The evolution of shear bands in Ta-2.5W alloy during cold rolling, Mater. Sci. Eng. A, 2018, 726: 259-273 (通讯)

(27) S Wang, L Niu, C Chen, Y Pang, Liao B, Z H Zhong, P Lu, X D Wu, W Jan Coenen, Lingfei Cao, Y C Wu, Size effects on the tensile properties and deformation mechanism of commercial pure titanium foils, Mater. Sci. Eng. A, 2018, 730: 244-261 (通讯)

(28) Yanjun Deng, Guangjie Huang, Lingfei Cao, Xiaodong Wu, Li Huang, Effect of ageing temperature on precipitation of Al-Cu-Li-Mn-Zr alloy, J. Cent. South Univ., 2018, 25: 1340-1349 (通讯)

(29) Li Huang, Lingfei Cao, Guangjie Huang, Xiaodong Wu, Mingyong Xia, Effect of pre-recovery on subsequent recrystallization kinetics in moderately deformed and supersaturated Al-Mn alloys, J. Cent. South Univ., 2018, 25:534-542 (通讯)

(30) X.G. Li, L.F. Cao, J.Y. Zhang, J. Li, J.T. Zhao, X.B. Feng, Y.Q. Wang, K. Wu, P. Zhang, G. Liu, J. Sun, Tuning the microstructure and mechanical properties of magnetron sputtered Cu-Cr thin films: The optimal Cr addition, Acta Mater., 2018, 151:87-99

(31) Hailong Jia, Ruben Bjørge, Lingfei Cao, Hui Song, Knut Marthinsen, Yanjun Li, Quantifying the grain boundary segregation strengthening induced by post-ECAP aging in an Al-5Cu alloy, Acta Mater., 2018, 155: 199-213

(32) Lipeng Ding, Zhihong Jia, Jian-Feng Nie, Yaoyao Weng, Lingfei Cao, Houwen Chen, Xiaozhi Wu, Qing Liu, The structural and compositional evolution of precipitates in Al-Mg-Si-Cu alloy, Acta Mater., 2018, 145:437-450

(33) Haiyang Fan, Shifeng Liu, Chao Deng, Xiaodong Wu, Lingfei Cao, Qing Liu, Quantitative analysis: How annealing temperature influences recrystallization texture and grain shape in tantalum, Int. J. Refract. Met. Hard Mater.; 2018, 72: 244-252

(34) Y. Zou, Y. B. Xu, D. T. Han, Z. P. Hu, H.Song, R. D. K. Misra, L. F. Cao, S Q Chen, Aging characteristics and strengthening behavior of a low-carbon mediumMn Cu-bearing steel, Mater. Sci. Eng. A, 2018, 729:423-432

(35) S. F. Liu, Y. H. Liu, L. J. Li, C. Deng, H. Y. Fan, Y. Guo, L. F. Cao, Q. Liu, Effects of pre-recovery on the recrystallization microstructure and texture of high-purity tantalum, J. Mater. Sci., 2018, 53:2985-2994

(36) Y. H. Liu, S. F. Liu, J L Zhu, H. Y. Fan,  C. Deng, L. F. Cao, X. D. Wu, Q. Liu, Strain accommodation of <110>-normal direction-oriented grains in micro-shear bands of high-purity tantalum, J. Mater. Sci., 2018, 53: 12543-12522

(37) Chang Chen, Sanfeng Qiang, Shan Wang, Long Niu, Rui Liu, Bin Liao, Zhihong Zhong, Pin Lu, Ping Li, Lingfei Cao, Yucheng Wu, The microstructure and formation mechanism of face-centered cubic Ti in commercial pure Ti foils during tensile deformation at room temperature, Mater. Charact., 2018, 136: 257-263

(38) Hao Zhong, Lingfei Cao, Effect of alloy composition and pre-ageing on the stretch formability of 6xxx automotive sheet alloys, Mater. Sci. Forum, 2018, 941: 955-960 (通讯)

(39) Hua Chen, Rongkai Yang, Xiaodong Wu, Yuan Yuan, Bing Zhang, Guan Chen, Lingfei Cao, Development of Al-Fe-(Cu) series alloys for aluminum cables and the related annealing behaviors, Mater. Sci. Forum, 2018, 941: 937-942 (通讯)

(40) L. Niu, S. Wang, C. Chen, S.F. Qian, R. Liu, H. Li, B. Liao, Z.H. Zhong, P. Lu, M.P. Wang, P. Li, Y.C. Wu, L.F.Cao, Mechanical behavior and deformation mechanism of commercial pure titanium foils, Mater. Sci. Eng. A, 2017, 707: 435-4422 (通讯)

(41) Hao Zhong, Paul A. Rometsch, Xiaodong Wu, Lingfei Cao,Yuri Estrin, Influence of pre-ageing on the stretch formability of Al-Mg-Si automotive sheet alloys, Mater. Sci. Eng. A, 2017, 697: 79-85 (通讯)

(42) Hao Zhong, Paul A. Rometsch, Qianqian Zhu, Lingfei Cao, Yuri Estrin, Effect of pre-ageing on dynamic strain ageing in Al-Mg-Si alloys, Mater. Sci. Eng. A, 2017, 687: 323-331(通讯)

(43) Li Huang, Guangjie Huang, Lingfei Cao, Xiaodong Wu, Zhihong Jia, Mingyong Xia, Qing Liu, Influence of pre-recovery on the subsequent recrystallization and mechanical properties of a twin-roll cast Al-Mn alloy, Mater. Sci. Eng. A, 2017, 682: 63-72 (通讯)

(44) J.T. Zhao, J.Y. Zhang, L.F. Cao, Y.Q. Wang, P. Zhang, K. Wu, G. Liu, J. Sun, ,Zr alloying effect on the microstructure evolution and plastic deformation of nanostructured Cu thin films, Acta Mater., 2017, 132:550-564

(45) Zhihong Jia, Lipeng Ding, Lingfei Cao, Robert Sanders, Shichen Li, Qing Liu, The influence of composition on the clustering and precipitation behavior of Al-Mg-Si-Cu alloys, Metall. Mater. Trans. A, 2017, 48: 459-473

(46) Yanjun Deng, Jianhui Bai,Xiaodong Wu, Guangjie Huang, Lingfei Cao, Li Huang, Investigation on formation mechanism of T1 precipitate in an Al-Cu-Li alloy, J. Alloys Compd., 2017, 723: 661-666

(47) Yahui Liu, Shifeng Liu, Jialin Zhu, Chao Deng, Haiyang Fan, Lingfei Cao, Qing Liu, Strain path dependence of microstructure and annealing behavior in high purity tantalum, Mater. Sci. Eng. A, 2017, 707: 518-530

(48) Li Huang, Guangjie Huang, Yunchang Xin, Lingfei Cao, Xiaodong Wu, Zhihong Jia, Qilei Li, Qing Liu, Tailoring the microstructure and mechanical properties of the final Al-Mn foils by different intermediate annealing, J. Mater. Sci. Technol., 2017, 33: 961-970

(49) S. Wang, S.K. Feng, C. Chen, Y.L. Jia, M.P. Wang, Z. Li, Z.H. Zhong, P. Lu, P. Li, L.F. Cao, Y.C.Wu, A twin orientation relationship between {001}<210>and {111}<110> obtained in Ta-2.5W alloy during heavily cold rolling, Mater. Charact., 2017, 125: 108-113

(50) Yanjun Deng, Guangjie Huang, Lingfei Cao, Xiaodong Wu, Li Huang, Mingyong Xia, Improved strength and ductility of Al-Cu-Li alloy through cryogenic rolling followed by ageing, Trans. Nonferrous Met. Soc.China, 2017, 27: 1920-1927

(51)  Bin Liao, Xiaodong Wu, Changjian Yan, Zhen Liu, Lingfei Cao, Guangjie Huang, Qing Liu, Microstructure characterization of Al cladded Al-Zn-Mg-Cu sheet in different hot deformation conditions, Trans. Nonferrous Met. Soc. China, 2017, 27: 1689-1697

(52) Chang Chen, Shan Wang, Yanlin Jia, Mingpu Wang, Zhou Li, Zhihong Zhong, Ping Lu, Yucheng Wu, Lingfei Cao, The evolution of dislocation microstructure in electron beam melted Ta-2.5W alloy during cold rolling, Int. J. Refract. Met. Hard Mater., 2016, 61: 136-146 (通讯)

(53) Xiaodong Wu, Bin Liao, Chanjian Yan, Li Huang, Lingfei Cao, Grain refinement in an Al-Zn-Mg-Cu casting ingot, Mater. Sci. Forum, 2016, 877: 104-108 (通讯)

(54) Hao Zhong, Paul A. Rometsch, Lingfei Cao,Yuri Estrin, The influence of Mg/Si ratio and Cu content on the stretch formability of 6xxx aluminium alloys, Mater. Sci. Eng. A, 2016, 51: 688-697 (通讯)

(55) Chong Yang, Peng Zhang, Di Shao, Ruihong Wang, Lingfei Cao, Jinyu Zhang, Gang Liu, Baoan Chen, Jun Sun, The influence of Sc solute partitioning on the microalloying effect and mechanical properties of Al-Cu alloys with minor Sc addition, Acta Mater., 2016, 119: 68-79

(56) Qunying Yang, Dong Yang, Zhiqing Zhang, Lingfei Cao, Xiaodong Wu, Guangjie Huang, Qing Liu, Flow behavior and microstructure evolution of 6A82 aluminium alloy with high copper content during hot compression deformation at elevated temperatures, Trans. Nonferrous Met. Soc. China, 2016, 26: 649-657

(57) Lingfei Cao, Xiaodong Wu, Suming Zhu, Junfa Mei, Xinhua Wu, Colleen Bettles, The effect of HIPping pressure on phase transformations in Ti-5Al-5Mo-5V-3Cr, Mater. Sci. Eng. A, 2014, 598: 207-216.

(58) Talukder Alam, Pavani Kami, Lingfei Cao, Soumya Nag, Colleen Bettles, Xinhua Wu, Rajarshi Banerjee, On the role of C addition on α precipitation in a β titanium alloy, Metall. Mater. Trans. A, 2014, 45: 1089-1095.

(59) L.F. Cao, P.A. Rometsch, M.J. Couper, Effect of pre-ageing and natural ageing on the paint bake response of alloy AA6181A, Mater. Sci. Eng. A, 2013, 571: 77-82. (通讯)

(60) L.F. Cao, P.A. Rometsch, M.J. Couper, Clustering behaviour in an Al-Mg-Si-Cu alloy during natural ageing and subsequent under-ageing, Mater. Sci. Eng. A, 2013, 559: 257-261.(通讯)

(61) W.J. Liang, P.A. Rometsch, L.F. Cao, N. Birbilis, General aspects related to the corrosion of 6xxx series aluminium alloys: Exploring the influence of Mg/Si ratio and Cu, Corros. Sci. 2013, 76: 119-128

(62) M.J. Starink, L.F. Cao, P.A. Rometsch, A model for the thermodynamics of and strengthening due to co-clusters in Al-Mg-Si based alloys, Acta Mater. 2012, 60: 41944207 

(63) L.F. Cao, H.S. Park, G. Dodbiba, K. Ono, C. Tokoro, T. Fujita,Keeping gallium metal to liquid state under the freezing point by using silica nanoparticles, Appl. Phys. Lett. , 2011, 99: 143120 (通讯)

(64) P.A. Rometsch, L.F. Cao, X.Y. Xiong, B.C. Muddle:Atom Probe Analysis of Early-stage Strengthening Behaviour in an Al-Mg-Si-Cu Alloy, Ultramicroscopy, 2011, 111: 690-694

(65) L. F. Cao, Paul A. Rometsch, Hao Zhong, Barry C. Muddle, Effect of pre-ageing on the artificial ageing response of Al-Mg-Si(-Cu) alloys, Mater. Sci. Forum, 2010, 654-656:, 918-921(通讯)

(66) L. F. Cao, H. S. Park, G. Dodbiba,T. Fujita, Synthesis of an ionic liquid-based magnetorheological fluid dispersing Fe84Nb3V4B9 nanocrystalline powders, Int. J. Mod. Phys. B, 2010, 24: 1227-1231(通讯)

(67) H.S. Park, L. F. Cao, G. Dodbiba, T. Fujita: Liquid gallium based temperature sensitive functional fluid dispersing chemically synthesized FeMB Nanoparticles, J. Phys.: Conf. Ser., 2009, 149: 012108

(68) M. X. Guo, M. P. Wang, K. Shen, L.F. Cao, W. Tan, Tensile Fracture Behavior Characterization of Dispersion Strengthened Copper Alloys, J. Alloys Compd., 2009, 469: 488-498

(69) L. F. Cao, H.S. Park, G. Dodbiba, T. Fujita, Dispersion of submicron Ni particles into liquid gallium, Magnetohydrodynamics, 2008, 44: 3-10

(70) W. Tan, M. X. Guo, L.F. Cao, K. Shen and M.P.Wang: The annealing characteristics of pure molybdenum bars manufactured by a modified technique, J. Alloys Compd., 2008, 462: 386-391 (通讯)

(71) H.S. Park, G. Dodbiba, L. F. Cao, T. Fujita: Synthesis of silica-coated ferromagnetic fine powder by heterocoagulation, J. Phys.: Condens. Matter, 2008, 20: 204105

(72) M. X. Guo, M. P. Wang, K. Shen, L. F. Cao, Z. Li, Z. Zhang, Synthesis of nano TiB2 particles in copper matrix by in situ reaction of double-beam melts, J. Alloys Compd. 2008, 460: 585-589

(73) Mingpu Guo, Mingpu Wang, Kun Shen, Lingfei Cao, Ruoshn Lei, Shumei Li, Effect of Cold rolling on Properties and Microstructures of Dispersion Strengthened Copper Alloys, Trans. Nonferrous Met. Soc. China, 2008,18(2): 333-338

(74) L. F. Cao, D. Xie, M. X. Guo, H.S. Park and T. Fujita, Size and shape effects on Curie temperature of ferromagnetic nanoparticles, Trans. Nonferrous Met. Soc. China, 2007,17 (6): 1451-1455. (通讯)

(75) M.X. Guo, M.P. Wang, L.F. Cao, R.S. Lei, Work softening characterization of alumina dispersion strengthened copper alloys, Mater. Charact., 2007, 58: 928-935

(76) L. F. Cao, G. Y. Xu, D. Xie, M. X. Guo, L. Luo, Z. Li and M. P. Wang, Thermal Stability of Fe, Co, Ni Metal Nanoparticles, Phys. Status Solidi B, 2006, 243 (12): 2745-2755. (通讯)

(77) L. F. Cao, M P Wang, D. Xie, M X Guo, W Tang, Thermal behavior and structure of Fe84Nb7B9 nanocrystalline powers, Trans. Nonferrous Met. Soc. China, 2006, 16: 299-303. (通讯)

(78) D. Xie, M. P. Wang, W. H. Qi, L. F. Cao, Thermal stability of indium nanocrystals: A theoretical study, Mater. Chem. Phys., 2006, 96: 418-421

(79) L. F. Cao, M. P. Wang, D. Xie, Z. Li, G. Y. Xu, Thermal Stability of Fe, Co, Ni Magnetic Nanoparticles, Mod. Phys. Lett. B, 2005, 19(25): 1253-1260. (通讯)

(80) Z. Li, L. F. Cao, M. X. Guo, N.Tang, M.Fang, N.Liu: Deformation behavior of Beta1 phase in polycrystalline CuAlMnZnZr shape memory alloy with wide tranfromation hysteresis, Mater. Sci. Eng. A, 2005, 403: 227-233.

(81) Zhou Li, Mingpu Wang, Mingxing Guo, Lingfei Cao, Xiangliang Jiang, Effect of cooling rate on the order in martensite of a Cu-Zn-Al alloy, J. Mater. Sci., 2005, 40:123-127

(82) D. Xie, M. P. Wang, L. F. Cao, A simplified model to calculate the higher surface energies of nanocrystals, Phys. Status Solidi B, 2005, 242(8): R76-R78.

(83) L. F. Cao, M. P. Wang, M. X. Guo, Z. Li, Heat treatment of modified 6005A alloy for vehicles, Trans. Mater. Heat treat., 2004, 25 (5):.619-622.

(84) L. F. Cao, M. P. Wang, Z. Li, B. Xu, Thermal Cycling Effect in Cu-11.9Al-2.5Mn Shape Memory Alloy with High Ms Temperature, Trans. Nonferrous Met. Soc. China, 2002, 12(4): 716-719.

(85) 曹玲飞,汪明朴,李周,王艳辉,尹志明,Cu-17.0Zn-xCr合金形变热处理,中国有色金属学报,200212:145-150

(86) Zhou Li, Mingpu Wang, Lingfei Cao, Yuchang Su, Genying Xu, Crystal structure and thermal stability of martensite in Cu-24Al-3Mn alloy, Trans. Nonferrous Met. Soc.China, 2002, 12(1): 6-10

表彰及奖励

低断罐率和低针孔率薄型化铝合金罐料材生产关键技术集成与应用,2016年度重庆市科学技术奖,科技进步奖三等奖,排名第二。

 

科研团队

刘庆教授“形变金属与微结构”课题组

课题组主页:http://www.qingliu.cqu.edu.cn/index.asp

      欢迎致力于从事铝合金微观组织与性能调控、材料多维多尺度表征技术等相关领域研究的学生报考本课题组博士、硕士研究生。

 

bob综合体育投注|bob手机版网页-「首页进入」