欢迎访问bob综合体育投注院!
所在位置: 网站首页 > 师资队伍 > 教工名录 > 正文
教工名录

【此处插入照片宽度190

(照片处暂空出)

王柯

系所:材料加工系

职称:副教授

职务:

学位:工学博士

邮箱:[email protected]

电话:18502348389

学习工作经历

2004.09 - 2008.06  西北工业大学   bob手机版网页        工学学士

2008.09 - 2014.06   西北工业大学   bob手机版网页        工学博士(硕博连读)

2014.07 - 2017.08   bob综合体育投注     bob手机版网页        材料加工系       讲师

2017.09 - 至今.  bob综合体育投注      bob手机版网页        材料加工系        副教授

社会兼职

 

主讲课程

本科课程:《材料力学性能》;《计算机在材料科学与工程中的应用》;《轧制测试技术》

研究生课程:《材料动力学》

 

主要研究方向

1、钛合金双相体系变形机制原位研究;

2、钛合金组织-性能关系定性和定量研究;

3、钛、镁合金微观组织演变多尺度模拟;

4、钛、镁合金高温变形和热处理一体化工艺、及组织遗传性研究

科研项目

1、钛合金双相组织中滑移启动和传递机制的原位SEM-EBSD研究;国家自然科学基金面上项目;2020.1~2023.12;负责人

2、多尺度微结构钛合金变形机制与组织性能调控;中央高校基本科研业务费项目国防专项;2020.01~2021.12;负责人

3、预变形对钛合金两相区冷却过程中次生α相形核的影响;国家自然科学基金青年基金;2016.1~2018.12;负责人

4、双相钛合金滑移传递及裂纹形核机制的原位EBSD研究;重点实验室开放基金;2019.1~2020.12;负责人

5、片层组织钛合金微观组织演变分析;横向项目;2019.1~2020.12;负责人

6、钛合金两相区冷却速度对次生α相形核的影响;中央高校基本科研业务费专项资金项目;2015.1~2016.12;负责人

 

论文/专著/专利

1. Z.B. Yan, K. Wang*, et al., Crystallographic orientation dependent crack nucleation during the compression of a widmannstatten-structure α/β titanium alloy, Scripta Materialia, 156 (2018) 110-114.

2. Y. Zhou, K. Wang*, Z. Yan, R. Xin, S. Wei, X. Wang, Q. Liu, Ex-situ study on mechanical properties and deformation mechanism of three typical microstructures in TA19 titanium alloy, Materials Characterization, 167(2020) 110521.

3. Y. Zhou, K. Wang*, R. Xin, Q. Liu, Effect of special primary α grain on variant selection of secondary α phase in a near-α titanium alloy, Materials Letters, 271(2020) 127766.

4. K. Wang*, M.Y. Wu, et al., Microtructure evolution and static recrystallization during hot rolling and annealing of an equiaxed-structure TC21 titanium alloy, Journal of Alloys and Compounds, 752 (2018) 14-22

5. K. Wang*, M.Y. Wu, et al., Dynamic restoration and deformation heterogeneity during hot deformation of a duplex-structure TC21 titanium alloy, Materials Science and Engineering: A, 712 (2018) 440-452

6. D.R. Li, K. Wang*, et al., Evolution of microstructure and tensile properties during the three-stage heat treatment of TA19 titanium alloy, Materials Science and Engineering: A 716 (2018) 157-164

7. M. Wu, R. Xin, Y. Wang, Y. Zhou, K. Wang*, Q. Liu, Microstructure, texture and mechanical properties of commercial high-purity thick titanium plates jointed by electron beam welding, Materials Science and Engineering: A, 677(2016) 50-57.

8. K. Wang*, M. Li, Q. Liu, Evolution mechanisms of the primary α and β phases during α/β deformation of an α/β titanium alloy TC8, Materials Characterization, 120 (2016) 115-123

9. K. Wang*, D.L. Sun, Y.L. Wu, R.L. Xin, M.Y. Wu, Q. LiuCorrelation between flow behavior and microstructure evolution during α/β deformation of TA19 titanium alloy, Advanced Engineering Materials

10. K. Wang*, M.Q. Li, Characterization of discontinuous yielding phenomenon in isothermal compression of TC8 titanium alloy, Trans. Nonferrous Met. Soc. China, 26(2016) 1583-1588.

11. K. Wang, M.Q. Li. Morphology and crystallographic orientation of the secondary α phase in a compressed α/β titanium alloy. Scripta Materialia, 68 (2013) 964-967

12. K. Wang, M.Q. Li. Effect of hot deformation and heat treatment on secondary α phase evolution of TC8 titanium alloy. Materials Science and Engineering A, 613 (2014) 209-216

13. K. Wang, M.Q. Li. Flow behavior and deformation mechanism in the isothermal compression of the TC8 titanium alloy. Materials Science and Engineering A, 600 (2014) 122-128.

14. K. Wang, M.Q. Li, J. Luo, C. Li. Effect of the δ phase on the deformation behavior in isothermal compression of superalloy GH4169. Materials Science and Engineering A, 528 (2011) 4723-4731.

15. K. Wang, M.Q. Li, C. Li. The δ and austenite phase evolution and model in the solution treatment of superalloy GH4169. Materials Science and Technology, 29 (2013) 346-350

 

表彰及奖励


科研团队


 

 

bob综合体育投注|bob手机版网页-「首页进入」