欢迎访问bob综合体育投注院!
所在位置: 网站首页 > 师资队伍 > 教工名录 > 正文
教工名录
【此处插入照片宽度190】

何维均

系所:材料加工系

职称:副教授

职务:院长助理

学位:工学博士

邮箱:[email protected]

电话:

地址:

学习工作经历

2003.09 - 2007.06     bob综合体育投注 材料科学与工程 本科 工学学士

2007.09 - 2013.07     中国科学院金属研究所 材料加工工程 硕博连读 工学博士

2010.10 - 2012.10    德国Fraunhofer材料力学研究所 材料加工工程 联合培养博士

2013.12 - 2017.8      bob综合体育投注 材料加工系 讲师

2017.09 - 至今          bob综合体育投注 材料加工系 副教授

2018.05 - 至今          bob综合体育投注 材料加工工程 博士生导师


社会兼职

Materials Science & Engineering AJournal of nuclear materialsJournal of magnesium and alloysJournal of materials science and technologyJournal of materials engineering and performanceApplied composite materials等期刊审稿人


主讲课程

本科生课程: 《材料力学性能》、《轧车间设计》

研究生课程: 《金属材料的织构与各向异性》


主要研究方向

1. 先进非均匀结构金属材料的设计、构筑及其强韧化机制;

2. 镁合金、钛合金、锆合金等六方金属的微观组织与力学性能研究;

3. 弹塑性本构模型开发、晶体塑性、多尺度模拟及其成形过程中的应用研究。


科研项目

国家自然科学基金面上项目:“基于相变法制备分级层状梯度结构Zr-Ti材料及其强韧化机制”,2020-2023,项目负责人;

重庆市基础与前沿面上项目:“仿生层状结构Mg/Mg材料的可控制备与强韧化机制研究”,2019-2022,项目负责人;

企业委托项目:“镀铝锌机组内圈卷取不良研究”,2019-2020,研究骨干

北美福特URP项目:“铝合金电阻点焊焊接接头力学性能模拟研究”,2018-2020,研究骨干

国家自然科学基金青年项目:“深冷轧制对锆合金薄板退火织构及成形性能的影响规律与机制”,2017-2019,项目负责人;

重庆市基础与前沿面上项目:“正交加载条件下的镁合金薄板变形行为及其本构模型研究”,2014-2017,项目负责人;

企业委托项目:“钛/钢复合板界面结合机制及调控研究”,2015-2018,项目负责人

国家自然科学基金重点项目“新型锆合金强韧化途径与机制”,2016-2018,研究骨干;

国家“863”重点项目“促进产业升级的纳米材料技术及应用”课题“轻质高强碳纳米管/铝基复合材料宏量制备技术研究”,2012-2014年,研究骨干;

科技部国家基础研究规划项目(973计划):“镁合金形变机理及低成本高延展性塑性加工(后三年)”,2015-2017,研究骨干;

科技部国家重大专项项目:“国产新锆合金加工性能研究”,2012-2016,研究骨干;


论文及专著

学术论文:

2020

W. H. Chen, W. J. He*, Z. J. Chen, B. Jiang, Q. Liu. Extraordinary room temperature tensile ductility of laminated Ti/Al composite: Roles of anisotropy and strain rate sensitivity. International Journal of Plasticity 133(2020)102806

X. Chen, Q. H Zeng, W. J. He*, Q. Liu. Pre-deformation enhanced {10–12} twinning in a zirconium alloy. Materials Science & Engineering A 789 (2020) 139650

B. X. Li, W. J. He**, Z. J. Chen*, H. T. Huang, L. Peng, J. Li, Q. Liu. Evolution of interface and collaborative deformation between Ti and steel during hot roll bonding. Materials Characterization 164(2020) 110354

2019

X. Chen, Q. H Zeng, W. J. He*, Q. Liu.  Detwinning behavior in commercial pure zirconium during orthogonal re-compression after pre-compression and annealing. Materials Science & Engineering A 767 (2019) 138444

B. X. Li, W. J. He**, Z. J. Chen*, T. Q. Mo, L. Peng, J. Li, Q. Liu. Influence of annealing on the microstructure, interfacial compounds and mechanical properties of hot rolling bonded Ti/steel clad plate with bimetallic interlayered steel and vanadium. Materials Science & Engineering A 764 (2019) 138227

W. H. Chen, W. J. He*, Z. J. Chen*, Z. Zhou, Q. Liu. Effect of wavy profile on the fabrication and mechanical properties of Al/Ti/Al composites preparedby rolling bonding: experiments and finite element simulations. Advanced Engineering Materials, 2019, 1900637

T. Q. Mo, Z. J. Chen* , B. X. Li, H. T. Huang, W. J. He**, Q. Liu. Effect of cross rolling on the interface morphology and mechanical properties of ARBed AA1100/AA7075 laminated metal composites. Journal of Alloys and Compounds 805 (2019) 617e623

T.Q. Mo, Z. J. Chen*, H. Chen, C. Hu, W. J. He**, Q. Liu. Multiscale interfacial structure strengthening effect in Al alloy laminated metal composites fabricated by accumulative roll bonding.. Materials Science & Engineering A 766 (2019) 138354

B. X. Li, Z. J. Chen*, W. J. He*, T. Zhou, Y. Wang, L. Peng, J. Li, Q. Liu. Effect of titanium grain orientation on the growth of compounds at diffusion bonded titanium/steel interfaces. Materials Characterization, 148(2019)243-251

B. X. Li, Z. J. Chen*, W. J. He*, P. J. Wang, J. S. Lin,Y. Wang, L. Peng, J. Li, Q. Liu. Effect of interlayer material and rolling temperature on microstructures and mechanical properties of titanium/steel clad plates. Materials Science & Engineering A, 749(2019)241-248

2018

J. T. Ma, W. J. He*, Q. Liu. Strengthening a multilayered Zr/Ti composite by quenching at higher temperature. Materials Science & Engineering A, 737(2018)1-8.

W. J .He*, A. Chapuis, X. Chen, Q. Liu. Effect of loading direction on the deformation and annealing behavior of a zirconium alloy. Materials Science & Engineering A, 734(2018)364-373.

W. J .He*, T. Lin, Q. Liu. Experiments and Constitutive Modeling of Deformation Behavior of a Magnesium Sheet during Two-Step Loading. International Journal of Solids and Structures, 147(2018)52-60.

W. J .He*, X. Chen, H. Chen, Q. Liu. Grain size effect on the thermally activated twin boundary migration in a zirconium alloy. Materials Science & Engineering A, 724(2018)576-585.

W. J .He*, J. T. Ma, Y. X. Zhang, H. Y. Wen, Q. Liu. Effect of the annealing process on the microstructure and mechanical properties of multilayered Zr/Ti composites. Materials Science & Engineering A, 713(2018)214-222.

Y. Wang Y, W. J. He*, N. Liu, A. Chapuis, B. F. Luan, Q. Liu. Effect of pre-annealing deformation on the recrystallized texture and grain boundary misorientation in commercial pure titanium. Materials Characterization, 136(2018)1-11.

W. J. He, G. H. Yuan, B. F. Luan, L. Wang, L. H. Chu, Q. Liu. On the Pilger Rolling of Zr-4 Alloy: Finite Element Modeling and Plastic Deformation Behaviors. Rare Metals Materials and Engineering. 47(2018)82-88.

N. Liu, Y. Wang, W. J. He*, J. Li, A. Chapuis, B. F. Luan, Q. Liu. Microstructure and textural evolution during cold rolling and annealing of a commercially pure titanium sheet. Transactions of Nonferrous Metals Society of China. 28(2018)1123-1131.

2017及以前代表作::

W. J. He*, X. Chen, N. Liu, B. F. Luan, G. H. Yuan, Q. Liu. Cryo-rolling enhanced inhomogeneous deformation and recrystallization grain growth of a zirconium alloy. Journal of Alloys and Compounds, 699(2017)160-169

W. J. He*, L. Zheng, R. L. Xin, Q. Liu. Microstructure-based modeling of tensile deformation of a friction stir welded AZ31 Mg alloy. Materials Science and Engineering: A, 687(2017)63-72

W. J. He*, Q. H. Zeng, H. H. Yu, Y. C. Xin, B. F. Luan, Q. Liu. Improving the room temperature stretch formability of a Mg alloy thin sheet by pre-twinning. Materials Science and Engineering: A, 655(2016)1-8

W. J. He*, B. F. Luan, R. L. Xin, J. B. Xu, Q. Liu. A multi-scale model for description of strain localization in friction stir welded magnesium. Computational Materials Sciences. 104(2015)162-171

W. J. He, C. H. Li, B. F. Luan, R. S. Qiu, K. Wang, Z. Q. Li, Q. Liu. Deformation behaviors and processing maps of CNTs/Al alloy composites fabricated by flake powder metallurgy. Transactions of Nonferrous Metals Society of China. 25(2015)3578-3584.

W. J. He, S. H. Zhang*, H. W. Song. An extended homogenous yield function based anisotropic hardening model for description of anisotropic hardening behavior of materials. International Journal of Mechanical Sciences. 77(2013)343–355

W. J. He, S. H. Zhang*. A. Prakash, D. Helm. A hierarchical multiscale model for hexagonal materials taking into account texture evolution during forming simulation. Computational Materials Sciences. 82(2014)464-475

W.J. He, S.H. Zhang*, H.W. Song and M. Cheng. Hydrogen-induced hardening and softening of a β-titanium alloy. Scripta Materialia. 61(2009)16-19




专利

何维均,马佳腾,杨艳,刘庆. 一种多级层状梯度材料的制备方法及其产品. 发明专利. 申请号:ZL 201810828805.3

何维均,刘佳,朱登峰,周正,黄光杰,刘庆. 基于单向试验机实现应力与应变比可调的双向拉伸装置. 发明专利. 申请号:ZL 201611226288.X

何维均,李博新,陈欣,陈泽军,刘庆. 一种层状金属复合板界面结合强度评价方法. 授权发明专利. 专利号:ZL 201610457336.X

何维均,栾佰峰,信运昌,黄光杰,刘庆. 一种基于孪生变形的镁合金薄板成形性能改善方法. 授权发明专利. 专利号:ZL 201510431611.6

何维均,栾佰峰,黄光杰,刘庆. 一种板材成形极限图测试装置. 授权实用新型专利. 专利号:ZL 201420561082.2

表彰及奖励


科研团队

每年招收硕士研究生2-3名,招收博士研究生1-2名,欢迎有兴趣的同学联系



bob综合体育投注|bob手机版网页-「首页进入」